Cookie Policy: This site uses cookies to improve your experience. You can find out more about our use of cookies in our Privacy Policy. By continuing to browse this site you agree to our use of cookies.
Vector
VECTASHIELD® Mounting Medium with DAPI
Product Details | |
---|---|
Product Type | Chemical |
Properties | |
Crossreactivity | Multi-species |
Declaration | Manufactured by Vector Laboratories |
Other Product Data |
VECTASHIELD® Antifade Mounting Medium is a unique, stable formula for preserving fluorescence. This Medium prevents rapid photobleaching of fluorescent proteins and fluorescent dyes. The original Medium does not solidify, but remains a liquid on the slide and can be stored without sealing. If desired, coverslips can be sealed around the perimeter with nail polish or a plastic sealant. Mounted slides should be stored at 4 °C, protected from light. VECTASHIELD® HardSet™ Mounting Medium preserves fluorescence and hardens after coverslipping. After approximately 15 minutes at room temperature, the coverslip will become immobilized, and optimal antifade ability and refractive index will be achieved. VECTASHIELD® Mounting Media are compatible with a wide array of fluorochromes, enzymatic substrates, and fluorescent proteins. Please consult the compatibility table to determine if VECTASHIELD® will be compatible in your system. Both the VECTASHIELD® HardSet™ and the original VECTASHIELD® Mounting Media are available with or without the counterstain DAPI (4 , 6-diamidino-2-phenylindole). DAPI produces a blue fluorescence when bound to DNA with excitation at about 360 nm and emission at 460 nm. The refractive index for VECTASHIELD® Mounting Medium is 1.45. Other manufacturers measure the antifade properties of their mountants using labeled microspheres or arrayed spots. Vector Labs prefers to measure antifade properties of VECTASHIELD® mountants using frozen tissue sections immunohistochemically stained with fluorescently labeled secondary antibodies. Antifade capability is measured using a 40x objective with real time imaging over 30 seconds of continuous exposure to the excitation illumination. Individual intensity measurements are recorded from 6 separate labeled regions and the average is calculated. The intensity after 30 second exposure is expressed as a percentage of the intensity at zero time. |
Shipping and Handling | |
Shipping | AMBIENT |
Short Term Storage | +20°C |
Long Term Storage | +4°C |
Documents | |
MSDS | Inquire |
Product Specification Sheet | |
Datasheet | Download PDF |
Histology reagents or solutions or stains used for Immunofluorescence, In situ hybridization, Cellular Imaging, Super-Resolution Microscopy.